📞 +7 (903) 279 8817 📞 +86 159 5110 9958 ✉ info@ydctrading.com
Filter Rexroth Maintenance Indicator for
Filter Rexroth Maintenance Indicator for (Rexroth) is supplied as a genuine part. A Chinese-made equivalent with matching mounting dimensions and ratings can be sourced on request.
Send the part number or a photo — we confirm stock and lead time with your quote within 24 hours.
Filter Rexroth Maintenance Indicator for
We match a genuine part or a quality equivalent to your application. Send the part number or a photo — we reply within 24 hours.
Be the first to review “Filter Rexroth Maintenance Indicator for”
You must be logged in to post a review.
About filters and filter elements
Filter Rexroth Maintenance Indicator for is a filter or filter element for removing mechanical contamination from hydraulic fluid.
Filter types
| Type | Location | Rating |
|---|---|---|
| Suction | At the pump inlet | 80–150 µm |
| Pressure | Downstream of the pump | 3–10 µm |
| Return line | In the return line | 10–25 µm |
| Air breather | On the tank | — |
What matters when selecting
- Filtration rating — driven by the requirements of the hydraulic components. For proportional equipment, no coarser than 10 µm.
- Flow rate — nominal and maximum, including peaks.
- Connection — threaded, flanged or cartridge type.
- Clogging indicator — visual or electrical.
Oil contamination is a leading cause of hydraulic failures. Saving on filters usually costs more than the repair.
Frequently asked questions
How often should a filter element be replaced?
By the clogging indicator or according to schedule — typically every 500–1,000 operating hours. More often in severe conditions.
Can a filter element be washed and reused?
No. Reusable mesh elements can be washed, but paper and glass-fibre elements are replacement-only.
What happens if a coarser filter is fitted?
Accelerated pump and valve wear, possible spool jamming and loss of control accuracy.
Reviews
There are no reviews yet.