📞 +7 (903) 279 8817 📞 +86 159 5110 9958 ✉ info@ydctrading.com
Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R
Need the price and lead time?
Send us the part number — we reply within 24 hours.
Or call: +86 159 5110 9958
Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R (Hansa Flex) is supplied as a genuine part. A Chinese-made equivalent with matching mounting dimensions and ratings can be sourced on request.
Send the part number or a photo — we confirm stock and lead time with your quote within 24 hours.
Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R
We match a genuine part or a quality equivalent to your application. Send the part number or a photo — we reply within 24 hours.
Be the first to review “Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R”
You must be logged in to post a review.
Request a quote for this part
Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R · HFH-41-3208-0302-C1-R-EN
About hydraulic valves
Hydraulic distributor CETOP Hansa Flex HK 41 3208 0302 C1 R is a flow control element for hydraulic fluid. We supply valves from Danfoss (including former Eaton and Comatrol), Bosch Rexroth, HAWE, HYDAC, Parker and Hansa Flex — genuine parts and quality alternatives.
Classification by function
| Group | What it does | Series |
|---|---|---|
| Check valves | Allow flow in one direction only | CV, PSV, SBV |
| Relief valves | Limit maximum pressure | RV, VMPP, PRV |
| Pressure reducing | Lower pressure in a secondary circuit | PR, MRV |
| Directional (CETOP) | Change flow direction | 4WE6, 4WE10, DKE |
| Proportional | Smoothly regulate flow or pressure | PVG, DHZO |
| Flow control | Stabilise or divide flow | 2FRM, 9RD |
What matters when selecting
- Spool type — 2/2, 3/2, 4/2, 4/3 and centre condition (closed, open, float).
- Pressure — nominal and peak; do not exceed catalogue values.
- Flow — size with 10–20% headroom above working flow.
- Mounting — CETOP (NG6/NG10/NG16/NG25), cartridge, inline or monoblock.
- Actuation — manual, solenoid (12/24 V DC, 110/220 V AC), hydraulic, proportional.
Send us the marking or a photo of the nameplate — we will identify the series, spool type and offer a genuine part or a compatible alternative.
Frequently asked questions
Can a 4WE6 be replaced by a cartridge valve?
Only by reworking the hydraulic circuit and mounting plate. These are different design families — a direct part-for-part swap is not possible.
What if the model is discontinued?
We source a modern equivalent of the same size, or an updated model in the series with recalculated characteristics.
Is a filter needed upstream of the valve?
Yes. Oil contamination is the main cause of spool jamming and loss of tightness. We recommend filtration no coarser than 10 µm for proportional equipment.
Reviews
There are no reviews yet.