📞 +7 (903) 279 8817 📞 +86 159 5110 9958 ✉ info@ydctrading.com
Pump mounting flange Hansa Flex HK PL 300 01 10
Flange for pump connection: 128 x 98 · Pump: BG3/shaft 1:8 · Motor: BG132
Pump mounting flange Hansa Flex HK PL 300 01 10 (Hansa Flex) is supplied as a genuine part. A Chinese-made equivalent with matching mounting dimensions and ratings can be sourced on request.
Key specs: Flange for pump connection: 128 x 98; Pump: BG3/shaft 1:8; Motor: BG132.
Send the part number or a photo — we confirm stock and lead time with your quote within 24 hours.
Pump mounting flange Hansa Flex HK PL 300 01 10
| Flange for pump connection | 128 x 98 |
| Pump | BG3/shaft 1:8 |
| Motor | BG132 |
We match a genuine part or a quality equivalent to your application. Send the part number or a photo — we reply within 24 hours.
Be the first to review “Pump mounting flange Hansa Flex HK PL 300 01 10”
You must be logged in to post a review.
About hydraulic power units
Pump mounting flange Hansa Flex HK PL 300 01 10 is a hydraulic power unit or one of its assemblies: tank, pump group, control valves, filtration and monitoring.
Typical power unit composition
| Assembly | Function |
|---|---|
| Tank | Oil storage, cooling, contaminant settling |
| Pump group | Generates flow and pressure |
| Control valves | Controls the consumers |
| Filtration | Maintains oil cleanliness |
| Monitoring | Pressure gauges, level and temperature sensors |
What matters when ordering
- Flow and pressure — the base parameters for pump selection.
- Tank volume — typically 2–4 minutes of pump output.
- Duty cycle — continuous or intermittent; this determines cooling.
- Operating conditions — ambient temperature, contamination, climate.
We build power units for a specific task, or supply individual assemblies for repair and assembly.
Frequently asked questions
Can a power unit be assembled from individual components?
Yes — we supply pumps, tanks, valve blocks and filters separately for self-assembly or repair of an existing unit.
How do I choose the tank volume?
A guideline is 2–4 minutes of pump output. For systems with high heat generation the volume is increased.
Is a heat exchanger needed?
If the unit runs continuously under load or in a hot climate, generally yes.
Reviews
There are no reviews yet.