📞 +7 (903) 279 8817 📞 +86 159 5110 9958 ✉ info@ydctrading.com
Valve accessories Hansa Flex HK DFE 100 12VDC
Nominal voltage +/- 10 %: 12 VDC · W: 60 · for valve type: HK DFE 100 · Weight: 1.08
Valve accessories Hansa Flex HK DFE 100 12VDC (Hansa Flex) is supplied as a genuine part. A Chinese-made equivalent with matching mounting dimensions and ratings can be sourced on request.
Key specs: Nominal voltage +/- 10 %: 12 VDC; W: 60; for valve type: HK DFE 100; Weight: 1.08.
Send the part number or a photo — we confirm stock and lead time with your quote within 24 hours.
Valve accessories Hansa Flex HK DFE 100 12VDC
| Nominal voltage +/- 10 % | 12 VDC |
| W | 60 |
| for valve type | HK DFE 100 |
| Weight | 1.08 |
We match a genuine part or a quality equivalent to your application. Send the part number or a photo — we reply within 24 hours.
Be the first to review “Valve accessories Hansa Flex HK DFE 100 12VDC”
You must be logged in to post a review.
About hydraulic valves
Valve accessories Hansa Flex HK DFE 100 12VDC is a flow control element for hydraulic fluid. We supply valves from Danfoss (including former Eaton and Comatrol), Bosch Rexroth, HAWE, HYDAC, Parker and Hansa Flex — genuine parts and quality alternatives.
Classification by function
| Group | What it does | Series |
|---|---|---|
| Check valves | Allow flow in one direction only | CV, PSV, SBV |
| Relief valves | Limit maximum pressure | RV, VMPP, PRV |
| Pressure reducing | Lower pressure in a secondary circuit | PR, MRV |
| Directional (CETOP) | Change flow direction | 4WE6, 4WE10, DKE |
| Proportional | Smoothly regulate flow or pressure | PVG, DHZO |
| Flow control | Stabilise or divide flow | 2FRM, 9RD |
What matters when selecting
- Spool type — 2/2, 3/2, 4/2, 4/3 and centre condition (closed, open, float).
- Pressure — nominal and peak; do not exceed catalogue values.
- Flow — size with 10–20% headroom above working flow.
- Mounting — CETOP (NG6/NG10/NG16/NG25), cartridge, inline or monoblock.
- Actuation — manual, solenoid (12/24 V DC, 110/220 V AC), hydraulic, proportional.
Send us the marking or a photo of the nameplate — we will identify the series, spool type and offer a genuine part or a compatible alternative.
Frequently asked questions
Can a 4WE6 be replaced by a cartridge valve?
Only by reworking the hydraulic circuit and mounting plate. These are different design families — a direct part-for-part swap is not possible.
What if the model is discontinued?
We source a modern equivalent of the same size, or an updated model in the series with recalculated characteristics.
Is a filter needed upstream of the valve?
Yes. Oil contamination is the main cause of spool jamming and loss of tightness. We recommend filtration no coarser than 10 µm for proportional equipment.
Reviews
There are no reviews yet.